Purpose: Manage the wireless network interface settings for selected gateways. After a gateway in Routing Mode is registered you must edit all wireless network interfaces from Cloud Edge Cloud Console.
Location: Gateways > (Selected Gateway) > NETWORK > Interfaces

Procedure

  1. Click a wireless network interface's name.
    The wireless network interface name is read-only and is preset to the SSID assigned to that wireless network.
  2. Configure the interface settings.
    Option Description
    Type
    This is a read-only field where Type is pre-set to L3.
    Mode
    This is a read-only field where the mode is pre-set to Static.
    IPv4 address
    Specify the IPv4 address (example: 10.10.10.23).
    IPv4 netmask
    Specify the IPv4 subnet mask (example: 255.255.254.0).
    IPv4 default gateway
    Specify the IPv4 default gateway (example: 10.10.10.1). This settings is only required for WAN configurations.
    MTU
    Specify a value from 576 through 1500.
    MSS
    Select Overwrite and specify a value from 536 through 1460.
    Note
    Note
    The MSS value must not be greater than (MTU - 40).
    If MTU on the wlan interface is modified, MSS must be set correspondingly (MSS value is less than MTU - 40).
  3. Click Save.