Purpose: Manage the network interface settings for selected gateways. After a gateway in Bridge Mode is registered (including the Software Switch variation of Bridge Mode), you can edit only the MGMT interface from Cloud Edge Cloud Console.
Location: Gateways > (Selected Gateway) > NETWORK > Interfaces

Procedure

  1. Click an interface's name.
  2. Configure the interface using static mode settings.
    Option Description
    Type
    Select L3.
    If there are any outstanding setting changes on Cloud Edge Cloud Console, you cannot change the interface type until after you click Deploy All to make the existing changes effective.
    Mode
    This is a read-only field where the mode is pre-set to Static.
    IPv4 address
    Specify the IPv4 address (example: 10.10.10.23).
    IPv4 netmask
    Specify the IPv4 subnet mask (example: 255.255.254.0).
    MTU
    Specify a value from 576 through 1500.
    MSS
    Select Overwrite and specify a value from 536 through 1460.
    Note
    Note
    The MSS value must not be greater than (MTU - 40).
  3. Click Save.