Before you configure the switch interface (sw0), you should review what configuration
settings are available. Some settings are configured using the Cloud Edge on-premises console and some are configured using
Cloud Edge Cloud Console.
Cloud Edge Cloud Console is used to configure
Intranet Security mode settings, which control the
level of security provided for LAN to LAN intranet traffic.
For more information about security protection provided by each Intranet Security mode, see Security Protections Provided by Each
Intranet Security Mode.
High Security and Balanced Modes
Configured using Cloud Edge Cloud Console
| Setting | Description |
|
Intranet Security
mode
|
Sets the level of network security for the internal network.
|
|
Anomaly detection
|
A read-only field that displays whether IPS is enabled on the
gateway profile applied to this gateway.
IPS must be enabled to use flood rules and port scan rules.
|
|
Flood rules
|
Provides network IPS protection from flooding.
|
|
Port scan rules
|
Provides network IPS protection from port scanning.
|
Configured using Cloud Edge on-premises console
| Setting | Description |
|
Mode
|
DHCP or Static
|
|
MTU
|
Range: 576-1500
Default: 1438
|
|
Administrative
access
|
Available only if gateway has not been registered.
|
|
Advanced
Settings:
Enable Spanning Tree
Protocol
|
Prevents occurrence of loops on networks with redundant paths.
|
|
Advanced
Settings:
IGMP Snooping
|
Monitors IGMP traffic and then forwards IGMP traffic to only
interested end points.
|
High Speed Mode
Configured using Cloud Edge Cloud Console
| Setting | Description |
|
Intranet Security
mode
|
Sets the level of network security for the internal network.
|
Configured using Cloud Edge on-premises console
| Setting | Description |
|
Mode
|
DHCP or Static
|
|
MTU
|
Range: 576-1500
Default: 1438
|
|
Administrative
access
|
Available only if gateway has not been registered.
|
|
Advanced
Settings:
Enable Spanning Tree
Protocol
|
Prevents occurrence of loops on networks with redundant paths.
|