Purpose: Enable remote administrative access to the gateway.
Enabling SNMP allows users to obtain supported objects information from an SNMP
manager.
Location: Gateways > (Selected Gateway) > NETWORK >
Administrative Access
Procedure
- Select the services to enable for the interface.
-
On-Premises Console
-
Ping
-
SSH
-
SNMP
-
- In the field below the table, specify IPv4 addresses
allowed to remotely access the gateway.
Note
This setting determines the IPv4 address ranges that can remotely access the gateway. Single IPv4 addresses are supported and the '-' symbol can be used as a range mark. Format the IPv4 address and netmask as192.168.1.1/24. If nothing is specified, all IPv4 addresses are allowed.IPv6 addresses are not supported for administrative access. - Click Save.