Views:
This section describes firewall settings. Please make sure to configure your firewall correctly to make the communication open.
  • Firewall Setting for Machine with Management Console
    • Open 1000-1009 port for TCP protocol
      1000-1009 is used by Management console to receive the event back message from information server.
      Management console will listen at the port 1000 when startup. If the port is occupied by other program, management console will find one available port from 1000 – 1009.
  • Firewall setting for Information Server
    • Open 5005 – 5014 ports in TCP protocol.
      Port 5005 is used to receive the commands from Management Console. Normally, 5005 must be opened. If it is used by other program, please find one available port from 5006-5014 and open firewall setting.
    • Open 3000-3009 (UDP)
      Port 3000 is used to receive broadcast message. If port 3000 is occupied by certain program, please find one available port from 3000-3009 one by one and open the firewall.
    • Open 137-139 and 445 for RPC Over named pipe.
      • 137 (UDP)
      • 138 (UDP)
      • 139 (TCP)
      • 445 (TCP)
      These ports are opened to enable SPNT to use RPC Over named pipe to communicate.
    • Open 3628(TCP)
      Port 3628 is used to receive event back.
    • Open 1921 for SPX/TCP with Netware
      Port 1921 is used to communicate with Netware through the SPX/TCP protocol.
  • Firewall setting in the Windows machine with Normal Server
    • Open 5168 for listening RPC over TCP/IP from Information Server
      Port 5168 is used to receive commands from Information Server.
    • Open 137-139 and 445 for named pipe.
      • 137 Protocol is UDP.
      • 138 Protocol is UDP.
      • 139 Protocol is TCP.
      • 445 Protocol is TCP.
      These ports are opened to enable SPNT to use RPC over named pipe to communicate.
      Firewall setting in the netware machine with normal server.
    • Open port 9921 (SPX/TCP).
      This port is used to receive commands from Information Server.