![]() |
NoteTrend Micro recommends performing this KHM test
before installing it to your computer. This prevents you from installing a non-working
KHM in
your Linux computer, causing the computer to hang after every system reboot.
|
Before you perform the KHM test, stop the ServerProtect services.
/etc/init.d/splx stop
Type the following command to perform a basic functional test for the KHM you have
just built.
This test should take less than 5 seconds. If the test takes longer than 5 seconds,
this
indicates that your system has stopped responding.
make test
![]() |
WARNINGThis test script will only perform basic tests to ensure that the KHM MAY work. A
successful
test result does NOT guarantee that the KHM can work properly under all circumstances.
During
the KHM test, your system may hang or you may experience a kernel panic. Trend Micro recommends performing this operation on a
test computer.
|
Refer to #5 in Troubleshooting for more information if:
-
your Linux computer stops responding during the KHM test
-
the KHM fails the test (in this case, do not install the KHM)