Define the non-monitored and monitored targets based
on the transmission scope configured on the Channel tab.
For details on how to define non-monitored and monitored targets
for All transmissions, see Transmission Scope: All Transmissions.
For details on how to define non-monitored and monitored targets
for Only transmissions outside the Local Area Network,
see Transmission Scope: Only Transmissions Outside the Local Area Network.
-
Define each target by:
-
IP address
-
Host name
-
FQDN
-
Network address and subnet mask, such as 10.1.1.1/32
Note
For the subnet mask, Data Loss Prevention only supports a classless inter-domain routing (CIDR) type port. That means that you can only type a number like 32 instead of 255.255.255.0. -
-
To target specific channels, include the default or company-defined port numbers for those channels. For example, port 21 is typically for FTP traffic, port 80 for HTTP, and port 443 for HTTPS. Use a colon to separate the target from the port numbers.
-
You can also include port ranges. To include all ports, ignore the port range.Examples of targets with port numbers and port ranges:
-
10.1.1.1:80
-
host:5-20
-
host.domain.com:20
-
10.1.1.1/32:20
-
-
Separate targets with commas.