 |
NoteTrend Micro recommends
choosing this scope for external agents.
|
If you do not want to monitor data transmissions to certain targets outside
the host computer, define the following:
-
Note
Data transmissions to non-monitored targets and to monitored targets where "Monitor" is the action are similar in that the transmission is allowed. The only difference is that for non-monitored targets, Data Loss Prevention does not log the transmission, whereas for monitored targets, the transmission is always logged. -
Monitored targets: These are specific targets within the non-monitored targets that should be monitored. Monitored targets are:
-
Optional if you defined non-monitored targets.
-
Not configurable if you did not define non-monitored targets.
-
For example:
The following IP addresses are assigned to your company's Legal
Department:
-
10.201.168.1to10.201.168.25
You are creating a policy that monitors the transmission of Employment
Certificates to all employees except the Legal Department's full time staff. To do
this, you
would select All transmissions as the transmission scope and then:
|
Option
|
Steps
|
|
Option 1
|
|
|
Option 2
|
Add the IP addresses of the Legal Department's full time
staff to the non-monitored targets:
|
For guidelines on defining monitored and non-monitored targets,
see Defining Non-monitored and Monitored Targets.