The following procedure is for manual upgrades only. For more
information about upgrading via Deep Discovery Director, see the Deep Discovery
Director product documentation.
Procedure
- Back up appliance configuration settings. For details, see Backup / Restore.
- If you have registered Deep Discovery Inspector to Apex Central, record the Apex Central
registration details.
Note
Deep Discovery Inspector migrates the current product settings after the service pack / version upgrade is complete so that you do not need to reconfigure settings. Deep Discovery Inspector re-registers to Apex Central automatically after the firmware update completes. - Download the Deep Discovery Inspector firmware image from the Trend Micro website or obtain the image from your Trend Micro reseller or support provider.
- Save the image to any folder on a computer.
- Go to .
- Browse to locate the folder where you saved the firmware image.
Tip
The image file has an.R.tar
extension. - Click Upload.
WARNING
Performing the next step restarts Deep Discovery Inspector. Make sure that you have finished all product console tasks before continuing. - Click OK.
Deep Discovery Inspector upgrades the firmware and restarts.
- Wait 5 minutes for the upgrade progress screen to load. Optionally, click Refresh in the browser to view the upgrade progress screen.
- Wait for the mangement console Log On screen to load.
- Clear the browser cache. For details, see Clearing the Browser Cache.
- Log back on to the management console.
- If Deep Discovery Inspector is registered to Apex Central, register the product again. For details, see Registering to Apex Central.