Procedure

  1. Power on the appliance.
    Note
    Note
    The power button is found on the front panel of the appliance, behind the bezel.
    The power-on self-test (POST) screen appears.
  2. Insert the DVD containing the Deep Discovery Analyzer installation package.
  3. Restart the appliance.
    The POST screen appears.
  4. The Deep Discovery Analyzer Appliance Installation screen appears.
  5. Select 1. Install Appliance and press ENTER.
    • For hardware models that include a serial port, when installing Deep Discovery Analyzer via the serial port, select 2. Install Appliance via Serial Port and press ENTER.
    The License Agreement screen appears.
  6. Click Accept.
    The Select Disk screen appears.
  7. Select the disk on which to install the Deep Discovery Analyzer software.
  8. Click Continue.
    The program checks if the minimum hardware requirements are met, and then displays the Hardware Profile screen.
  9. Click Continue.
    WARNING
    WARNING
    Installation involves repartitioning of the disks. All data on the disks are lost.
    A confirmation message appears.
  10. Click Continue.
    The installation program repartitions the disks and prepares the environment for installation. Upon completion, the appliance is restarted and Deep Discovery Analyzer software is installed.
    Configure the IP address of the appliance on the preconfiguration console to complete the deployment process. For details, see Configuring Network Addresses on the Preconfiguration Console.
    Note
    Note
    It is recommended that you configure iDRAC (Integrated Dell Remote Access) on the appliance to allow remote system management and troubleshooting.