Views:

There are three proxy settings: Proxy Settings for StellarOne to internet, Proxy settings for StellarOne to Agent communications, and Proxy Settings for Agent to StellarOne communicates.

  1. Go to Administration > Proxy.
  2. Toggle on the Proxy Settings... to enable below settings.

    • Proxy Settings for StellarOne to internet

    • Proxy Settings for StellarOne to Agent communications

    • Proxy Settings for Agent to StellarOne communications

  3. To configure proxy settings for updates:

    1. Select the HTTPS or HTTP protocol.

      Note:

      For Proxy Settings for Agent to StellarOne communications, since currently the StellarProtect does not support HTTPS proxy, if the destination is an HTTPS server, please use the HTTP proxy for connection.

    2. In the Server Address field, specify the IPv4 address or FQDN of the proxy server.

    3. Specify the Port.

    4. If your proxy server requires authentication, select Proxy server requires authentication and enter your credentials.

    5. Click Save.

    Tip:
    To configure the proxy settings used by StellarOne when sending messages to StellarProtect:

    • Before installation: Add the proxy information to the configuration file in the Agent's installer package and save the proxy settings. The settings will then be included in the Agent's installer package after the Agent's installer package is repacked.

    • After installation: Use the opcmd.exe or SLCmd.exe Command Line Interface tool on the local StellarProtect or StellarProtect (Legacy Mode) Agent.

Parent topic: Update