Views:

A list of available CLI commands for managing the Service Gateway virtual appliance.

To access the CLI, connect to VMware ESXi (either directly or through SSH) and open the Service Gateway virtual appliance. Log on to the CLI with your account credentials.
For customers using the previous Service Gateway 1.0 version, check the Service Gateway 1.0 CLI commands.
Note
Note
Make sure you disable the Scroll Lock key on your keyboard when using HyperTerminal.
To view basic information of the Service Gateway, such as network settings and service status, run the show command. For example, use show ipv4 address to check the network address. For a list of available commands, type show and then press the ? key.
To view a list of tasks you can perform and enable administrative commands, run the enable command. Enabling administrative commands changes the command prompt from > to #. The following tables list out the administrative commands you can use to manage the Service Gateway virtual appliance.

Basic Commands

Command
Syntax
Description
configure endpoint
configure endpoint <hostname>
Configure the endpoint name
<hostname>: Endpoint name or FQDN
configure time
configure time <HH:MI:SS>
Configure the time for the Service Gateway virtual appliance
configure data purge
configure data purge
Delete unused service files and service logs to free up space on the data partition.
configure image delete
configure image delete
Delete inactive service images
The service partition typically stores up to three versions of images for each installed service. Executing this command deletes the older, inactive images to free up space on the service partition.
configure network
configure network primary ipv4.static <interface> <ip_cidr> <gateway> <dns1> [dns2] [cni]
Configure static IPv4 network settings for the primary network interface
<interface>: Name of the network interface (for example, eth0)
<ip_cidr>: IPv4 address of the network interface in CIDR notation
<gateway>: Gateway router address
<dns1>: Primary DNS server address
[dns2]: Secondary DNS server address
[cni]: Internal network address pool (IP address ending in .0.0)
configure ntp
configure ntp <ntp_addr1> [ntp_addr2] [ntp_addr3] [ntp_addr4] [ntp_addr5]
Configure NTP servers
Up to 5 NTP servers supported
<ntp_addr1>: FQDN or IPv4 address of the first NTP server
<ntp_addr2>: FQDN or IPv4 address of the second NTP server
<ntp_addr3>: FQDN or IPv4 address of the third NTP server
<ntp_addr4>: FQDN or IPv4 address of the fourth NTP server
<ntp_addr5>: FQDN or IPv4 address of the fifth NTP server
configure password
configure password
Configure the account password
configure port list
configure port list
List the ports used by the Service Gateway virtual appliance
configure port enable
configure port enable <port>
Enable a port used by the Service Gateway virtual appliance
<port>: Port number. Example: 80
configure port disable
configure port disable <port>
Disable a port used by the Service Gateway virtual appliance
<port>: Port number. Example: 80
configure proxy
configure proxy delete
Delete proxy settings
configure proxy set http <addr>
Configure the proxy server for the Service Gateway virtual appliance
<addr>: Specify proxy settings as follows:
  • <ADDRESS>:<PORT>: IP address and port of proxy (no authentication required)
  • <USER>:<PASSWORD>@<ADDRESS>:<PORT>: Account credentials with IP address and port of proxy (BASIC authentication required)
configure storage
configure storage add
Add additional storage to the Data and Service partitions of the virtual appliance
configure storage extend data [size]
Extend data file system storage
[size]: Storage size for extension in GB. If not specified, all free space available on device is used.
configure storage extend image [size]
Extend image file system storage
[size]: Storage size for extension in GB. If not specified, all free space available on device is used.
configure storage status
Show storage status
configure verify
configure verify cli
Verify the command line status of the Service Gateway virtual appliance
configure verify dns
Verify DNS server configuration
[domain]: Domain used to verify DNS server (default: www.google.com)
configure verify images
Verify the Service Gateway virtual appliance images
configure verify iot
Verify the AWS server IOT settings
configure verify ntp
Verify NTP server settings
configure verify os
Verify the operating system status of the Service Gateway virtual appliance
configure verify plat
Verify the platform status of the Service Gateway virtual appliance
configure verify curl <URL>
Verify the HTTP request status of the Service Gateway virtual appliance
configure swglb set
configure swglb set <port number>
Redirect 80/443 traffic to the specified port
Important
Important
This command applies exclusively to the Internet Access load balancing settings. Ensure that only Internet Access services are enabled when using this command.
configure swglb delete
configure swglb delete
Remove traffic redirection, allowing 80/443 traffic to be sent to the original port
connect
connect
Test connection to Service Gateway Management
exit
exit
Exit the CLI
help
help
Display the CLI syntax
history
history [limit]
Display the session's command history
[limit]: The number of CLI commands to display
log collect
log collect
Collect Service Gateway debugging data for troubleshooting
logout
logout
Sign out of the CLI
ping
ping <address>
Check the connection to a specific address
reboot
reboot [time]
Restart the Service Gateway after a specified delay or immediately
[time]: Delay in minutes
register
register <regiatration_token>
Register the Service Gateway to Trend Vision One
shutdown
shutdown [time]
Shut down the Service Gateway after a specified delay or immediately
[time]: Delay in minutes
rollback
rollback
Roll back the Service Gateway to the last version

Configure Commands for Multiple Network Interfaces

Command Syntax Description
configure network
configure network additional ipv4.delete
Delete IPv4 network settings for the additional network interface
configure network additional ipv4.static <interface> <ip_cidr> <gateway> <dns1> [dns2]
Configure static IPv4 network settings for the additional network interface
<interface>: Name of the network interface (for example, eth1)
<ip_cidr>: IPv4 address of the network interface in CIDR notation
<gateway>: Gateway router address
<dns1>: Primary DNS server address
[dns2]: Secondary DNS server address
configure network primary ipv4.static <interface> <ip_cidr> <gateway> <dns1> [dns2] [cni]
Configure static IPv4 network settings for the primary network interface
<interface>: Name of the network interface (for example, eth0)
<ip_cidr>: IPv4 address of the network interface in CIDR notation
<gateway>: Gateway router address
<dns1>: Primary DNS server address
[dns2]: Secondary DNS server address
[cni]: Internal network address pool (IP address ending in .0.0)
configure network additional ipv6.delete
Delete IPv6 network settings for the additional network interface
configure network additional ipv6.static <ipl> <gateway> <dns1> [dns2]
Configure static IPv6 network settings for the additional network interface
<interface>: Name of the network interface (for example, eth1)
<ipl>: IPv6 address of the network interface in CIDR notation
<gateway>: Gateway router address
<dns1>: Primary DNS server address
[dns2]: Secondary DNS server address
configure network primary ipv6.delete
Delete IPv6 network settings for the primary network interface
configure network primary ipv6.static <ipl> <gateway> <dns1> [dns2]
Configure static IPv6 network settings for the primary network interface
<interface>: Name of the network interface (for example, eth1)
<ipl>: IPv6 address of the network interface in CIDR notation
<gateway>: Gateway router address
<dns1>: Primary DNS server address
[dns2]: Secondary DNS server address
configure route
configure route additional ipv4.add <destination> <gateway>
Add a new IPv4 route for the additional network interface
<destination>: Destination IPv4 addresses in CIDR notation
<gateway>: IPv4 address of the gateway
configure route additional ipv4.delete <destination> <gateway>
Delete an IPv4 route of the additional network interface
<destination>: Destination IPv4 addresses in CIDR notation
<gateway>: IPv4 address of the gateway
configure route primary ipv4.add <destination> <gateway>
Add a new IPv4 route for the primary network interface
<destination>: Destination IPv4 addresses in CIDR notation
<gateway>: IPv4 address of the gateway
configure route primary ipv4.delete <destination> <gateway>
Delete an IPv4 route of the primary network interface
<destination>: Destination IPv4 addresses in CIDR notation
<gateway>: IPv4 address of the gateway
configure route ipv4.default additional <gateway>
Configure the additional network interface as the default IPv4 route for the Service Gateway virtual appliance
<gateway>: IPv4 address of the gateway
configure route ipv4.default primary <gateway>
Configure the primary network interface as the default IPv4 route for the Service Gateway virtual appliance
<gateway>: IPv4 address of the gateway
configure route additional ipv6.add <destination> <gateway>
Add a new IPv6 route for the additional network interface
<destination>: Destination IPv4 addresses in CIDR notation
<gateway>: IPv6 address of the gateway
configure route additional ipv6.delete <destination> <gateway>
Delete an IPv6 route of the additional network interface
<destination>: Destination IPv4 addresses in CIDR notation
<gateway>: IPv6 address of the gateway
configure route primary ipv6.add <destination> <gateway>
Add a new IPv6 route for the primary network interface
<destination>: Destination IPv6 addresses in CIDR notation
<gateway>: IPv6 address of the gateway
configure route primary ipv6.delete <destination> <gateway>
Delete an IPv6 route of the primary network interface
<destination>: Destination IPv6 addresses in CIDR notation
<gateway>: IPv6 address of the gateway
configure route ipv6.default additional <gateway>
Configure the additional network interface as the default IPv6 route for the Service Gateway virtual appliance
<gateway>: IPv6 address of the gateway
configure route ipv6.default primary <gateway>
Configure the primary network interface as the default IPv6 route for the Service Gateway virtual appliance
<gateway>: IPv6 address of the gateway
Related information