Views:

Configure internal network traffic with the VMware vSphere Standard Switch in promiscuous mode to allow Virtual Network Sensor to monitor data.

Important
Important
The following instructions are valid as of July 2023.

Procedure

  1. Turn off your Virtual Network Sensor.
  2. On the VMware vCenter console, click the VMware_vCenter_server_icon=GUID-20230329175050.png tab.
  3. Click the name of your virtual machine.
    Internal_VSS_Prom1=GUID-20230729143645.png
  4. Go to ConfigureVirtual switchesADD NETWORKING.
  5. On the Add Networking screen, select Virtual Machine Port Group for a Standard Switch and click NEXT.
    Internal_VSS_Prom2=GUID-20230729143646.png
  6. Select Select an existing standard switch and click NEXT.
    Internal_VSS_Prom3=GUID-20230729143647.png
  7. Type a name for your Network label, select All (4095) for the VLAN ID, and click NEXT.
    Internal_VSS_Prom4=GUID-20230729143648.png
  8. Click FINISH.
    Internal_VSS_Prom5=GUID-20230729143649.png
  9. Click ellipsis_icon=GUID-20230330143737.png on your port group and select Edit Settings.
    Internal_VSS_Prom6=GUID-20230729143650.png
  10. Click Security and then select Override and Accept for promiscuous mode.
    Internal_VSS_Prom7=GUID-20230729143651.png
  11. Select Reject for MAC address changes and forged transmits and click OK.
  12. Click the name of your Virtual Network Sensor and click edit_settings_icon=GUID-20230729150707.png.
    Internal_VSS_Prom8=GUID-20230729143652.png
  13. On the Edit Settings screen, click Network adapter 2 and select Browse...
    Internal_VSS_Prom9=GUID-20230729143653.png
  14. Select the port group you created and click OK.
    Internal_VSS_Prom10=GUID-20230729143644.png
  15. Turn on your Virtual Network Sensor.