FortiGate Next-Generation Firewall integration

Procedure

1. Configure settings on Trend Vision One.
   1. Go to Workflow and Automation → Third-Party Integration.
   2. In the Integration column, click FortiGate Next-Generation Firewall.
   3. Click the toggle to enable or disable the integration.
   4. Review the Legal Statement and click Accept or Close to continue.
   5. Under Data Transfer, configure data sharing criteria and integration settings.
      1. Object type: Select the file hash value format to use.
      2. Risk level: Select the risk level of the suspicious object data to include in the shared data.
      3. Frequency: Select the frequency at which suspicious object data is shared.
      4. URL parameters: Select whether to remove query strings from URLs.
   6. Under Service Gateway Connection, configure the connection between the Service Gateway and the integration.
      1. Click Connect.
         The Service Gateway Connection panel appears.
      2. Select a Service Gateway.
      3. Configure the integration server settings.
      4. (Optional) Click Test Connection to verify if the settings are valid.
      5. Click Connect.
         The connection configuration is added to the list.
      6. Click the Generate Now icon () to generate suspicious object data sharing files immediately.
      7. Hover over the Copy URL icon () to copy the suspicious object data sharing URLs to use on your integration.
   7. Repeat the previous step to add multiple connection configurations for this integration.
   8. Click Save.
2. Configure settings on your integration.

   Note The following steps were performed using version 7.0.0 of the FortiOS GUI. If you are using a different version, refer to the documentation for your version.

   1. On the FortiOS GUI, go to Security Fabric → External Connectors.
   2. Click Create New and create an object for each of the following types of Threat Feeds.
      • FortiGuard Category: Create an object to retrieve suspicious object data for URLs.
      • IP Address: Create an object to retrieve suspicious object data for IP addresses.
      • Domain Name: Create an object to retrieve suspicious object data for domain names.
      • Malware Hash: Create an object to retrieve suspicious object data for file hashes.
   3. Configure the object.
      1. Name: Type a name for this object.
      2. URI of external resource: Paste the suspicious object data sharing URL that you obtained from the Trend Vision One console.
      3. HTTP basic authentication: Disable this setting.
      4. Refresh rate: Specify the rate at which this object checks for updates.

         Tip Trend Micro recommends matching the refresh rate to the suspicious object data sharing Frequency configured on Trend Vision One.

      5. Comments: Type some comments to help you identify this object.
      6. Status: Enable this setting.
      7. Click OK.
      • Your FortiGate appliance is configured to retrieve suspicious object data from the Trend Vision One Service Gateway.
      • The configured Threat Feeds objects can be used as external resources in Policies and Security Profiles.
   4. Repeat the previous two steps until you have created objects for each of the specified types of Threat Feeds.
   5. Go to Security Fabric → External Connectors → Threat Feeds, double-click on each object you created, and do the following:
      • Click the Refresh icon to retrieve suspicious object data from the Trend Vision One Service Gateway immediately.
      • (Optional) Click View Entries to display the suspicious object data retrieved from the Trend Vision One Service Gateway.