Hyper-V network settings | Trend Micro Service Central

Views:

After successfully deploying your Virtual Network Sensor, configure your network based on your requirements.

Once your Virtual Network Sensor has successfully connected to Network Inventory, use the table below to find the recommended configurations for your network environment based on your throughput and traffic type. Traffic type is determined by how data is passed from the monitored appliance to the Virtual Network Sensor:

Internal traffic is passed from the monitored appliance to a Virtual Network Sensor on the same host system through a virtual switch.
External traffic is passed from the monitored appliance to the Virtual Network Sensor via an external network switch. Generally, the monitored appliance is not on the same system as the Virtual Network Sensor, but can be in the case of monitoring VM-to-VM traffic or when using PCI passthrough.

To determine which deployment scenario is best for your network security needs, see Mapping your deployment with VMware vCenter.

Important

If your throughput is equal to or greater than 2 Gbps, using a PCI passthrough is recommended. Your data port must be able to connect to the internet.

Monitored Throughput	Traffic Type	Recommended Network Configuration
Less than 2 Gbps	Internal	Configure the port mirroring settings for the source and destination VMs on the host Hyper-V machine For more information, see Configuring internal network traffic on Hyper-V host.
Less than 2 Gbps	External	Configure the port mirroring settings for the destination VM on the host Hyper-V machine, or enable ERSPAN on the Virtual Network Sensor To configure the Virtual Network Sensor VM on the host machine, see Configuring external network traffic on Hyper-V host. To utilize ERSPAN, see Configuring external inter-VM traffic with ERSPAN (Hyper-V host).
Equal to or greater than 2 Gbps	External	Use PCI passthrough For more information, see Configuring external network traffic with PCI passthrough (Hyper-V host).