Views:

Manage how Deep Discovery Inspector appliances connect to Network Security and whether to leverage a Service Gateway as a service source.

The method which your Deep Discovery Inspector appliances use to connect to Network Security, whether by direct connection or using a Service Gateway as a proxy, can be modified directly in the Network Inventory app. Additionally, you can configure Deep Discovery Inspector appliances which connect directly to use a Service Gateway as a service source.
Note
Note
  • Connecting to Network Security using a Service Gateway as a proxy is only supported by Deep Discovery Inspector version 6.7 or later.
  • Make sure you have at least one Service Gateway configured with the following services installed and enabled:
    • Forward Proxy Service (for using a Service Gateway as a proxy)
    • ActiveUpdate
    • Smart Protection Services
    • Suspicious Object List synchronization (required for Deep Discovery Inspector version 6.7 and earlier)
    For more information, see Managing services in Service Gateway.
  • For ActiveUpdate and Smart Protection Services, use the Service Gateway host name or IP address to configure settings on the Deep Discovery Inspector console.
  • Connecting to a Service Gateway is not required to integrate the Deep Discovery Inspector appliance with Sandbox as a Service.
    Deep Discovery Inspector appliances can only connect to one Service Gateway at a time. If the appliance is already connected to a Service Gateway, the appliance disconnects from the currently connected Service Gateway and connects to the new Service Gateway.

Procedure

  1. In the Trend Vision One console, go to Network Security → Network Inventory → Deep Discovery Inspector.
  2. Select one or more connected appliances
  3. Click Configure Connection Settings.
    The Appliance Connection Settings panel appears.
  4. For the Connect method select how to connect the selected appliances to Network Inventory.
    • To connect directly to Network Inventory, select Direct connection.
    • To connect through a Service Gateway, select Connect using a Service Gateway as a proxy.
    Important
    Important
    • Connect using a Service Gateway as a proxy is only supported by Deep Discovery Inspector version 6.7 or later.
    • If you are changing from using a Service Gateway as a proxy to a direct connection, ensure your Deep Discovery Inspector is able to connect to the internet before updating the setting.
  5. For direct connections, configure the service source.
    • To use service source configured on the Deep Discovery Inspector, select Use the appliance settings to connect to services.
    • To connect to a Service Gateway, select Use the configured service settings on the selected Service Gateway and then select the Service Gateway to use as the source.
  6. Click Test Connection.
    Important
    Important
    Network Inventory can only perform the connection test on Deep Discovery Inspector version 6.7 or later. You can confirm if the settings were applied successfully to earlier versions in the Appliance Details screen.
    You can apply the settings to Deep Discovery Inspector version 6.7 or later appliances if the status is Successful.
    Earlier versions of Deep Discover Inspector show a status of Not tested. You can apply settings even if all other appliances return a status of Failed.
  7. Click Apply to apply the settings to all Deep Discovery Inspector appliances with a status of Successful or Not tested.