Update network interface information

Procedure

1. Select Admin → Server Properties, and then select the Network tab.
2. Update the following.

   Setting	Description
   Ethernet MAC ID(1)	Unique identifier assigned by the manufacturer to network interface cards (NICs) capable of supporting the IPv4 standard.
   Scope Link Address*	Unique identifier assigned by the manufacturer to network interface cards (NICs) capable of supporting the IPv6 standard.
   IP Address	Internet protocol (IP) address of the SMS server used for management communication.
   Subnet Mask	Subnet mask of the IP address.
   Gateway	Network gateway through which SMS Server traffic flows.
   IPv6 Address	IP version 6 address of the SMS Server.
   Default Router	IP address of the default router through which SMS Server traffic is routed to/from the network.

   Note The mgmtsettings command can be used to enable the high speed NIC for supported hardware platforms instead of the default onboard NIC.

3. Click Apply. If you change the management IP address, you must reboot the SMS server (Admin → General → SMS Server → Reboot).