The Ports tab displays the following information:
- Type — Type of port, such as Management Port or Data Port.
- Slot — IO slot is numbered from 1 to 4 for TPS 8400TX devices. For TPS 5500TX, 8200TX, 8600TXE, and 9200TXE devices, the IO slot is numbered from 1 to 2. For TPS 1100TX devices, the slot is 1.
- Port — Port designation.
- Segment — Segment associated with the port.
- Enabled — enabled/disabled status.
- Auto Negotiation— check mark indicates the port auto-negotiates for line speed.
- Configured — Speed and duplex configuration.
-
XCVR — Presence of a transceiver.
- Grayed out: Port does not accept a transceiver.
- Unchecked: No transceiver in the port.
- Checked: Transceiver is present.
- XCVR Info — Information on transceiver (TPS TX Series and TXE Series devices only) as applicable, such as transceiver connector type, compliance, and technology. If you see a red marker at the cell's upper-right corner, click the marker to expand the row for additional undisplayed information. Alternatively, toggle the visibility of information in expandable rows using the controls in the table's far left column.
- Negotiated — Negotiated setting.
- State — Health status of the port.
- Media — Type of media for the port, such as copper or fiber.