Views:

Procedure

  1. Go to Admin → Server Properties, and then select the SNMP tab.
  2. Click Add under NMS Trap Destinations.
  3. Enter the IP address and port number.
  4. Select a version from the following:
    1. Select v2, and use the Community String field to restrict access. By default, the Community String is “public.”
    2. Select v3, and provide the following information:
    • Username required for the SNMP application
    • Protocols used for authentication and privacy
    • Keys used with the authentication and privacy protocols
    The Engine ID is a read-only, SMS-generated identifier for the SNMP application. If no protocol is selected, the Key field is disabled.
  5. Click Test to send a test trap to the specified destination.
  6. Click OK.
  7. Click Apply.