Views:
These settings apply to the entire RADIUS server and all its users.

Procedure

  1. Select Admin → Authentication and Authorization → Authentication.
  2. Click the RADIUS tab.
  3. Click Edit under RADIUS Group Mapping.
  4. In the dialog, select a group mapping method and options for the SMS to use.
    Setting Description
    Authentication Mode
    Select one: Allow only users defined in the SMS to log in or Allow RADIUS users to log in with or without an SMS account.
    If you choose to allow access for non-local users, you must also specify how the New Resource Group will be determined for those users. By default, users are allowed to choose a New Resource Group.
    Authorization Mode
    If you configured Authentication Mode to allow only users defined in the SMS to log in, then you can select either of two options: Use SMS local group mappings or Use RADIUS group mappings. Otherwise, Authorization Mode uses RADIUS group mappings.
    RADIUS Mapping Attribute
    Type the RADIUS attribute to determine which group it should map to on the SMS.
    Mapping Failure Action
    Select an action to take when a RADIUS group cannot be mapped:
    • Reject Authentication
    • Accept Authentication with local SMS group mappings – available only if Authentication Mode is configured to allow only users defined in the SMS to log in.
    • Accept Authentication – Select an SMS user group to which the user is assigned for authorized access.
    Mapped Group Select a mapped group.
  5. Click OK.