Add or edit a switch

Procedure

1. On the Responder navigation pane, click Network Devices.
2. On the Network Devices screen, click New, or select an existing entry in the Network Devices list, and then click Edit.
   The Network Equipment wizard displays.
3. On the Device Address and Type screen, enter an IP Address for the switch and select a Switch Type from the menu.
4. Click SNMP Settings (or click Next), and then provide the SNMP Version and the SNMP Port for the device.
5. In the Community-based Security Model section, provide the appropriate values for Read Community and Write Community.
6. In the user-based Security Model area, provide the appropriate information in the following fields:
   • Engine ID
   • User Name
   • Authentication Protocol
   • Authentication Key
   • Privacy Protocol
   • Privacy Key

   Note The 3Com 7750 and 3Com 5500 switches support RFC1213 IP Correlation. To use IP Correlation with these switches, be sure to select Use this device for IP to MAC Correlation (ARP, via RFC 1213) on the configuration screen for your particular 3Com switch. To test this action, click Test.

7. Click Next, or select Implementation in the wizard navigation pane.
8. Click Finish.