Views:
To install SMD for Linux, perform the following steps:
  1. Open Terminal. To navigate to installation program, do one of the following:
    • If you are installing from the Trend Micro Enterprise Protection CD, navigate to the SMD folder on the CD.
    • If you downloaded the software from the Trend Micro Web site, navigate to the relevant folder on your server.
    Note
    Note
    The installation file uses the /tmp file system as temporary folder by default. However, you can change the temporary folder by setting the IATEMPDIR environment variable to a different directory on a partition with enough free disk space.
    To set the variable, enter one of the following commands at the UNIX command line prompt before running the installation:
    • For Bourne shell (sh), Bourne-again shell (bash), Korn shell (ksh), and Z shell (zsh):
      $ IATEMPDIR=/your/directory/with/free/space
      $ export IATEMPDIR
    • For C shell (csh) and TC Shell (tcsh):
      $ setenv IATEMPDIR /your/directory/with/free/space
  2. To make sure that the install.bin file has the execution privileges, type the following command:
    chmod 755 install.bin
  3. Run the installation file install.bin, by typing the command:
    ./install.bin -i console
    The installer starts unpacking the file.
    0-cmd-install.png
    After unpacking of installation file is complete, the Welcome screen appears as shown.
    1welcome.png
    Press Enter to continue the installation. The License Agreement screen appears.
    2-license-agreement.png
  4. On the Licence Agreement screen, press Enter to continue scrolling to the next screen of Licence Agreement. If you want to move to the end of the agreement, type skip or s and press Enter.
    3-accept-or-not-acce.png
  5. At the end of the License Agreement, Type 1 if you agree and accept the terms of the license agreement. If you do not agree with the terms of the license, type 2; the installation then stops after confirmation.
  6. Press Enter. The Product Activation screen appears.
    4-activation-code.png
  7. On the Product Activation screen, you must type the correct SMD Activation Codeto activate SMD.
    Note
    Note
    Obtain the Activation Code to activate an SMD Trial, Standard, Suite, or Suite with Data Loss Prevention version for a new installation.
    Do one of the following:
    • If you have not registered SMD:
      1. Go the Trend Micro Product Registration Web site (https://olr.trendmicro.com/registration) and follow the on-screen instructions to register your product. Register your product to ensure you are eligible to receive the latest security updates and other product and maintenance services.
        After registration is complete, Trend Micro sends the SMD Activation Code (AC) to the email address you specified during registration.
      2. Use the Activation Code you have received from Trend Micro to activate SMD.
    • If you have an Activation Code:
      Type the Activation Code for SMD. To use the full functionality of SMD 5.8 SP1, you need to obtain a Standard Suite or Suite with Data Loss Prevention Activation Code (see SMD Activation Code) and activate the software.
    • If you want to use the Configuration database to activate SMD later:
      Leave the Activation Code field blank. Setup installs SMD; however, the SMD scan or update task will not load. Activate SMD immediately after installation to protect your Domino environment (see SMD Activation Code).
  8. Press Enter.
  9. If you chose to proceed without the Activation Code, the setup will prompt for the confirmation. Do one of the following:
    1. To continue installing SMD without the Activation Code, type y and press Enter.
    2. If you want to type Activation Code at this point of installation:
      1. Type n and press Enter. The setup will prompt for the Activation Code.
      2. Type the SMD Activation Code. and press Enter.
    The Add or Remove Domino Server screen appears.
    5-add-domino-server.png
  10. On the Add or Remove Domino Server screen, type 1 and press Enter to add notes.ini server where you want to install SMD.
    Note
    Note
    If you have a partitioned server, install SMD on the partitions you want to protect.
    Accept current setting, and go to the next step option start the installation of selected Domino server (notes.ini). If you have not selected at least one notes.ini, Accept current setting, and go to the next step option would be ineffective. You must select at least one Domino server (notes.ini) before starting the installation process.
    1. Press Enter. The Add Domino Server - Notes.ini Path [Step 1/4] screen appears . Type the path where notes.ini file is located.
      6-1-path-to-domino-d.png
    2. Press Enter. Add Domino Server - Replication Setting [Step 2/4] screen appears.
      6-2-replication-sett.png
      By default, Setup enables replicating all databases except the Quarantine Database. If you want to change the default settings, select or deselect the SMD databases you want Setup to replicate or ignore. To select or deselect SMD database, do the following:
      1. Type the corresponding option number from 1 ~ 5 (for example, if you want to select Quarantine Database, type 4).
      2. Press Enter.
        Tip
        Tip
        If you plan to install SMD on several servers and replicate databases, you may want to disable replication of the Configuration database on subsequent servers. Select one server as the primary or administrative server to replicate to all other servers.
        Note
        Note
        Remember to schedule the replication of the Configuration database after installing SMD so that all servers receive the default policy.
      After making your selection, type 0 (zero) to accept setting, and proceed to next step.
    3. Press Enter. The Add Domino Server - ScanMail Management [Step 3/4] screen appears.
      6-3-specify-user-or-.png
      The default administrator group is LocalDomainAdmins. If you want to specify another user or group for the administration tasks, type a single administrator account or group that will have Manager access to all SMDdatabases.
      Note
      Note
      If the account you specify does not exist, then create it when you complete the installation. Ensure that the account has administrator authority.
    4. Press Enter. The Add Domino Server - Install Path [Step 4/4] screen appears.
      6-4-smld-installatio.png
      Type the installation path where you want the Setup to install the SMD. By default, Setup will install the SMD at /opt/trend.
      Note
      Note
      If SMD 5.8 SP1 has already been installed on one partition servers, the default installation path for the subsequent installation(s) will remain same and cannot be changed.
    5. After typing the installation path, press Enter. The selection of one Domino Server completes and the Add or Remove Domino Server screen appears again, displaying the list of selected Domino server(s).
      7-finished-notes-sel.png
      On the Add or Remove Domino Server screen, select one the following:
      • Type 0 (zero) to select current settings and start the installation of selected Domino server(s).
      • Type 1 to add another Domino server (notes.ini), and follow Substep a to Substep d of Step 10.
      • Type 2 to remove Domino server(s) previously selected.
  11. Press Enter. The Summary screen appears. Type Y or y to start installing the selected Domino server(s).
    8-installation-summa.png
  12. Press Enter. The installation begins.
    9-installing-smld.png
    After the installation completes, the Installation Complete message displays on the screen.
    10-installation-comp.png
    Note
    Note
    If this is the first time you install SMD, quit the current terminal session and start a new session.