Views:
Use the ScanMail Configuration Database Server Settings menu to create a server settings rule.
Tip
Tip
Create server setting rules per server or groups of servers.
To create a server settings rule:
  1. Open the ScanMail Configuration Database (see Accessing ScanMail Databases).
  2. On the left menu, click ConfigurationServer Settings.
  3. From the working area, click Create Server Settings.
  4. Specify which Server or Server Groups should apply the server settings rule.
  5. Set directories used for scanning (see Set a Scanning Directory).
  6. Set the memory size used for scanning (see Set the Memory Size for Scanning).
  7. Configure the proxy server settings that ScanMail will use for component download and product activation (see Configure the Proxy Server Settings).
  8. Configure inbound gateway IP address for ScanMail for Domino to obtain sender's IP address (see Configuring Inbound Gateway IP Addresses).
  9. Configure the Local Smart Scan Sources (see Configure Local Smart Scan Sources)
  10. Select the event that will trigger ScanMail to display notification via the Domino server console (see Monitor Server Events).
  11. Enable server task monitoring (see Enable Server Task Monitoring).
  12. Specify the default character set that ScanMail should use when it cannot detect the character set of a message (see Specify the Default Character Set).
  13. Configure miscellaneous settings (see Configure Miscellaneous Settings).
  14. Click Save & Close.
Keywords: server settings rule,server settings