Views:
If IMSVA cannot identify your hardware such as storage or network device, load driver disks before you try to install IMSVA again.
Contact the hardware vender to obtain a hardware driver applicable to CentOS 6.4 (x86_64). Then load a driver disk by referring to the driver's installation guide.
The following is an example of loading a driver disk.

Procedure

  1. Prepare your removable disk, for example, a USB diskette. Make sure the file system of your removable disk is available.
  2. Copy the driver image to the USB diskette.
    cp dd.iso /mnt/usb
  3. Insert the IMSVA Installation DVD into the DVD drive and start IMSVA installation.
    The setup wizard screen appears.
  4. Select Fresh install or version upgrade and press Tab to enter the edit mode.
  5. Append dd to the information that appears at the bottom of the setup wizard screen.
  6. Press Enter.
    The Driver disk screen appears.
  7. Insert your USB diskette and select Yes.
    The Driver Disk Source screen appears.
  8. Select your USB diskette, for example, sdb, and select OK.
    The Select driver disk image screen appears.
  9. Select the driver disk image.
    The More Driver Disks screen appears.
  10. Unplug your USB diskette and click No to continue IMSVA installation.