Registering to Deep Discovery Director

Procedure

1. Go to Administration → Integrated Products/Services → Deep Discovery Director.
2. Configure Connection Settings.

   Option	Description
   Server address	Type the server address for Deep Discovery Director.
   Port	Type the port number for Deep Discovery Director. Default is 443.
   API key	Type the API key for Deep Discovery Director. Note You can find this information on the Help screen on the management console of Deep Discovery Director.

3. (Optional) If you have configured proxy settings for Deep Discovery Web Inspector and want to use these settings for Deep Discovery Director connections, select Connect using a proxy server.

   Note This setting can be changed after registering to Deep Discovery Director. To update this setting without unregistering from Deep Discovery Director, click Update Settings.

4. Click Register.
   The Status changes to Registered | Connected.

   Note If the Deep Discovery Director fingerprint changes, the connection is interrupted and the Trust New Fingerprint button appears. To restore the connection, verify that the Deep Discovery Director fingerprint is valid and then click Trust New Fingerprint. After the registration process is complete, the Test Connection button appears. You can click Test Connection to test the connection to Deep Discovery Director.

   Important Integration with Deep Discovery Director for Virtual Analyzer image deployment requires additional disk space. After registering the Deep Discovery Web Inspector appliance to Deep Discovery Director, configure the appliance to delete logs when the total free disk space is less than 20%. For more information, see Configuring Storage Maintenance.