Views:
Configure the debug log level that Deep Discovery Web Inspector uses to save debug logs that you can provide to Trend Micro Support for troubleshooting a problem.
Important
Important
If you change the log level, you must wait for Deep Discovery Web Inspector to collect a sufficient number of logs at the new log level before exporting/downloading the debug log.

Procedure

  1. Go to Administration → System Maintenance → Debug Logs.
  2. Change the log level.
    Options are Error (default) or Debug.
  3. If log level is set to Debug, perform one of the following:
    • Enter an IP address in IP.
    • Enter an IP address range in IP Range.
  4. Click Save.
    Changing the log level setting restarts the service.
Keywords: system maintenance, configuring debug log level,debug log levels,configuring debug log levels,configuring