When Deep Discovery Web
Inspector is using an
internal Virtual Analyzer, you can configure how Virtual Analyzer instances connect
to external destinations, including the Internet. You can configure no network
access, access using the management port, or access using a custom port.
![]() |
NoteObject analysis is paused and settings are disabled whenever
Virtual Analyzer is being configured.
|
Procedure
- From the Network type drop-down list, select how Virtual
Analyzer connects to the network.
-
No network access
-
Management network
-
Custom network
For information about network types, see Types of Virtual Analyzer Networks. -
- Specify network connection settings, depending on
the network type specified.OptionDescriptionNo network accessThere are no configurable settings for this network type. This is the default selection.Management networkProxy settings
-
If a proxy server is not required for the internal Virtual Analyzer to connect to the Internet, select Do not use a proxy server from the drop-down list.
-
If a proxy server is required for the internal Virtual Analyzer to connect to the Internet, select Use a dedicated proxy server from the drop-down list and provide the following information:
-
Server address
-
Port
-
Proxy server requires authentication: If authentication is required, select this check box and type the user name and password.
-
Custom NetworkSandbox port-
If eth1 is not already configured, click Configure IPv4 settings to configure network settings.
Proxy settings-
If a proxy server is not required for the internal Virtual Analyzer to connect to the Internet, select Do not use a proxy server from the drop-down list.
-
If a proxy server is required for the internal Virtual Analyzer to connect to the Internet, select Use a dedicated proxy server from the drop-down list and provide the following information:
-
Server address
-
Port
-
Proxy server requires authentication: If authentication is required, select this check box and type the user name and password.
-
-
- Click Save.
- After configuring the network connection, click Test Internet
Connectivity to verify that Virtual Analyzer can connect to the
Internet.
Note
If No network access is selected, a connection cannot be established. The default setting is No network access.