To log on to the CLI, either connect directly to the Deep Discovery Web Inspector appliance or connect using SSH.

Procedure

  • To make a direct connection, connect a monitor and keyboard to the Deep Discovery Web Inspector appliance.
    The appliance's command line interface is displayed on the monitor. You can log in to the CLI and perform basic tasks.
  • If the SSH service is enabled, do the following to connect using SSH:
    1. Verify the computer you are using can ping Deep Discovery Web Inspector’s IP address.
    2. Use an SSH client to connect to Deep Discovery Web Inspector's IP address and TCP port 22.
      Note
      Note
      The default IP address / subnet mask is 192.168.252.1 / 255.255.0.0.
  • Log in to the CLI with the default credentials.
    • User name: admin
    • Password: ddwi
    Note
    Note
    Do not enable scroll lock on your keyboard when using HyperTerminal. If scroll lock is enabled, you cannot enter data.