Views:
Run a diagnostic test on Deep Discovery Inspector to capture and view a log of hardware and software status and events.

Procedure

  1. Log on to the Preconfiguration Console.
    The Main Menu appears.
  2. Type 4 and press ENTER.
    The System Tasks screen appears.
  3. Type 1 and press ENTER.
    The Diagnostic Test screen appears.
  4. On the HyperTerminal console, go to Transfer → Capture Text.
    Note
    Note
    This step uses HyperTerminal as an example. Other serial communication applications can be used, but this step may be different.
  5. Browse to the folder and specify a file name for the log.
    Note
    Note
    This step uses HyperTerminal as an example. Other serial communication applications can be used, but this step may be different.
  6. Click Start.
    Note
    Note
    This step uses HyperTerminal as an example. Other serial communication applications can be used, but this step may be different.
  7. Under Run diagnostic test now?, go to OK and press ENTER.
    While the diagnostic test runs, Deep Discovery Inspector displays log entries on the console.
    After the diagnostic test finishes, Deep Discovery Inspector generates a summary log report, and automatically restarts.
  8. After Deep Discovery Inspector restarts, open the log summary report to view the results.