Procedure

1. In Hyper-V Manager, click on the Deep Discovery Inspector virtual machine and then go to Action → Settings.
   The settings window appears.
2. In the left column, click Add Hardware.
   The Add Hardware settings appear.
3. For the devices you want to add, select Network Adapter.
4. Click Add.
   The Network Adapter settings appear.
5. For Virtual switch, select Management Switch.
6. In the left column, expand Management Switch and then click Advanced Features.
7. For Mirroring mode, select Destination.
8. Click OK.
9. In Hyper-V Manager, click on the virtual machine that is on the same host as Deep Discovery Inspector and then go to Action → Settings.
   The settings window appears.
10. In the left column, expand Management Switch and then click Advanced Features.
11. For Mirroring mode, select Source.
12. Click OK.
13. Start the Deep Discovery Inspector virtual machine and verify that the traffic is mirrored and detected.