Views:
By default, Deep Discovery Inspector automatically detects the network speed and duplex mode for the management port. These settings may be manually configured.
Tip
Tip
To maximize throughput, Trend Micro recommends full-duplex mode. Half-duplex is acceptable, but network throughput may be limited by transmission delays.
Note
Note
You can view the network interface settings in the management console. Go to Administration → System Settings → Network Interface. For details, see Network Interface in the Deep Discovery Inspector Administrator's Guide.

Procedure

  1. Log on to the Preconfiguration Console.
    The Main Menu appears.
  2. Type 3 to select Interface Settings and press ENTER.
    Note
    Note
    To enter data when using HyperTerminal, disable the scroll lock function on your keyboard.
    The Interface Settings screen appears.
  3. To change the interface settings, perform the following tasks:
    1. Type 1 and press ENTER.
    2. In the Speed and Duplex fields, use the space bar to change the network speed and duplex mode.
    3. Navigate to Return to upper menu and press ENTER.
  4. Type 2 and press ENTER to return to the main menu.
  5. Type 6 and press ENTER to save the settings.