SNMP Query Objects

.1.3.6.1.4.1.2021.4.3

memTotalSwap

The total amount of swap space configured for this host.

.1.3.6.1.4.1.2021.4.4

memAvailSwap

The amount of swap space currently unused or available.

.1.3.6.1.4.1.2021.4.5

memTotalReal

The total amount of real/physical memory installed on this host.

.1.3.6.1.4.1.2021.4.6

memAvailReal

The amount of real/physical memory currently unused or available.

.1.3.6.1.4.1.2021.4.11

memTotalFree

The total amount of memory free or available for use on this host. This value typically covers both real memory and swap space or virtual memory.

.1.3.6.1.4.1.2021.4.12

memMinimumSwap

The minimum amount of swap space expected to be kept free or available during normal operation of this host. If this value (as reported by 'memAvailSwap(4)') falls below the specified level, then 'memSwapError(100)' will be set to 1 and an error message made available via 'memSwapErrorMsg(101)'.

.1.3.6.1.4.1.2021.4.13

memShared

The total amount of real or virtual memory currently allocated for use as shared memory. This object will not be implemented on hosts where the underlying operating system does not explicitly identify memory as specifically reserved for this purpose.

.1.3.6.1.4.1.2021.4.14

memBuffer

The total amount of real or virtual memory currently allocated for use as memory buffers. This object will not be implemented on hosts where the underlying operating system does not explicitly identify memory as specifically reserved for this purpose.

.1.3.6.1.4.1.2021.4.15

memCached

The total amount of real or virtual memory currently allocated for use as cached memory. This object will not be implemented on hosts where the underlying operating system does not explicitly identify memory as reserved for this purpose.

.1.3.6.1.4.1.2021.4.100

memSwapError

Indicates whether the amount of available swap space (as reported by 'memAvailSwap(4)') is less than the minimum (specified by 'memMinimumSwap(12)').

.1.3.6.1.4.1.2021.4.101

memSwapErrorMsg

Describes whether the amount of available swap space (as reported by 'memAvailSwap(4)') is less than the minimum (specified by 'memMinimumSwap(12)').

.1.3.6.1.4.1.2021.9.1.1

dskIndex

Integer reference number (row number) for the disk mib.

.1.3.6.1.4.1.2021.9.1.2

dskPath

Path where the disk is mounted.

.1.3.6.1.4.1.2021.9.1.3

dskDevice

Path of the device for the partition.

.1.3.6.1.4.1.2021.9.1.4

dskMinimum

Minimum space required on the disk (in kBytes) before the errors are triggered. Either this or dskMinPercent is configured via the agent's snmpd.conf file.

.1.3.6.1.4.1.2021.9.1.5

dskMinPercent

Percentage of minimum space required on the disk before the errors are triggered. Either this or dskMinimum is configured via the agent's snmpd.conf file.

.1.3.6.1.4.1.2021.9.1.6

dskTotal

Total size of the disk/partition (kBytes).

.1.3.6.1.4.1.2021.9.1.7

dskAvail

Available disk space.

.1.3.6.1.4.1.2021.9.1.8

dskUsed

Disk space used.

.1.3.6.1.4.1.2021.9.1.9

dskPercent

Percentage of space used on disk.

.1.3.6.1.4.1.2021.9.1.10

dskPercentNode

Percentage of inodes used on disk.

.1.3.6.1.4.1.2021.9.1.100

dskErrorFlag

Error flag indicating that the disk or partition is under the minimum required space configured for it.

.1.3.6.1.4.1.2021.9.1.101

dskErrorMsg

A text description providing a warning and the space left on the disk.

.1.3.6.1.4.1.2021.11.3

ssSwapIn

The average amount of memory swapped in from disk, calculated over the last minute.

.1.3.6.1.4.1.2021.11.4

ssSwapOut

The average amount of memory swapped out to disk, calculated over the last minute.

.1.3.6.1.4.1.2021.11.5

ssIOSent

The average amount of data written to disk or other block devices, calculated over the last minute. This object has been deprecated in favour of 'ssIORawSent(57)', which can be used to calculate the same metric, but over any desired time period.

.1.3.6.1.4.1.2021.11.6

ssIOReceive

The average amount of data read from disk or other block devices, calculated over the last minute. This object has been deprecated in favour of 'ssIORawReceived(58)', which can be used to calculate the same metric, but over any desired time period.

.1.3.6.1.4.1.2021.11.7

ssSysInterrupts

The average rate of interrupts processed (including the clock) calculated over the last minute. This object has been deprecated in favour of 'ssRawInterrupts(59)', which can be used to calculate the same metric, but over any desired time period.

.1.3.6.1.4.1.2021.11.8

ssSysContext

The average rate of context switches, calculated over the last minute. This object has been deprecated in favour of 'ssRawContext(60)', which can be used to calculate the same metric, but over any desired time period.

.1.3.6.1.4.1.2021.11.9

ssCpuUser

The percentage of CPU time spent processing user-level code, calculated over the last minute. This object has been deprecated in favour of 'ssCpuRawUser(50)', which can be used to calculate the same metric, but over any desired time period.

.1.3.6.1.4.1.2021.11.10

ssCpuSystem

The percentage of CPU time spent processing system-level code, calculated over the last minute. This object has been deprecated in favour of 'ssCpuRawSystem(52)', which can be used to calculate the same metric, but over any desired time period.

.1.3.6.1.4.1.2021.11.11

ssCpuIdle

The percentage of processor time spent idle, calculated over the last minute. This object has been deprecated in favour of 'ssCpuRawIdle(53)', which can be used to calculate the same metric, but over any desired time period.

.1.3.6.1.4.1.2021.11.50

ssCpuRawUser

The number of 'ticks' (typically 1/100s) spent processing user-level code. On a multi-processor system, the 'ssCpuRaw*' counters are cumulative over all CPUs, so their sum will typically be N*100 (for N processors).

.1.3.6.1.4.1.2021.11.51

ssCpuRawNice

The number of 'ticks' (typically 1/100s) spent processing reduced-priority code. This object will not be implemented on hosts where the underlying operating system does not measure this particular CPU metric. On a multi-processor system, the 'ssCpuRaw*' counters are cumulative over all CPUs, so their sum will typically be N*100 (for N processors).

.1.3.6.1.4.1.2021.11.52

ssCpuRawSystem

The number of 'ticks' (typically 1/100s) spent processing system-level code. On a multi-processor system, the 'ssCpuRaw*' counters are cumulative over all CPUs, so their sum will typically be N*100 (for N processors). This object may sometimes be implemented as the combination of the 'ssCpuRawWait(54)' and 'ssCpuRawKernel(55)' counters, so care must be taken when summing the overall raw counters.

.1.3.6.1.4.1.2021.11.53

ssCpuRawIdle

The number of 'ticks' (typically 1/100s) spent idle. On a multi-processor system, the 'ssCpuRaw*' counters are cumulative over all CPUs, so their sum will typically be N*100 (for N processors).

.1.3.6.1.4.1.2021.11.54

ssCpuRawWait

The number of 'ticks' (typically 1/100s) spent waiting for IO. This object will not be implemented on hosts where the underlying operating system does not measure this particular CPU metric. This time may also be included within the 'ssCpuRawSystem(52)' counter. On a multi-processor system, the 'ssCpuRaw*' counters are cumulative over all CPUs, so their sum will typically be N*100 (for N processors).

.1.3.6.1.4.1.2021.11.55

ssCpuRawKernel

The number of 'ticks' (typically 1/100s) spent processing kernel-level code. This object will not be implemented on hosts where the underlying operating system does not measure this particular CPU metric. This time may also be included within the 'ssCpuRawSystem(52)' counter. On a multi-processor system, the 'ssCpuRaw*' counters are cumulative over all CPUs, so their sum will typically be N*100 (for N processors).

.1.3.6.1.4.1.2021.11.56

ssCpuRawInterrupt

The number of 'ticks' (typically 1/100s) spent processing hardware interrupts. This object will not be implemented on hosts where the underlying operating system does not measure this particular CPU metric. On a multi-processor system, the 'ssCpuRaw*' counters are cumulative over all CPUs, so their sum will typically be N*100 (for N processors).

.1.3.6.1.4.1.2021.11.57

ssIORawSent

Number of blocks sent to a block device.

.1.3.6.1.4.1.2021.11.58

ssIORawReceived

Number of blocks received from a block device.

.1.3.6.1.4.1.2021.11.59

ssRawInterrupts

Number of interrupts processed.

.1.3.6.1.4.1.2021.11.60

ssRawContexts

Number of context switches.

.1.3.6.1.4.1.2021.11.61

ssCpuRawSoftIRQ

The number of 'ticks' (typically 1/100s) spent processing software interrupts. This object will not be implemented on hosts where the underlying operating system does not measure this particular CPU metric. On a multi-processor system, the 'ssCpuRaw*' counters are cumulative over all CPUs, so their sum will typically be N*100 (for N processors).

.1.3.6.1.4.1.2021.11.62

ssRawSwapIn

Number of blocks swapped in.

.1.3.6.1.4.1.2021.11.63

ssRawSwapOut

Number of blocks swapped out.

.1.3.6.1.4.1.6101.3004.1.1

productVersion

Returns the Deep Discovery Email Inspector version.

.1.3.6.1.4.1.6101.3004.1.2

productBuild

Returns the Deep Discovery Email Inspector build number.

.1.3.6.1.4.1.6101.3004.1.3

productHotfix

Returns the Deep Discovery Email Inspector hotfix number.

.1.3.6.1.4.1.6101.3004.2.1.1

patternIndex

Returns the pattern index.

.1.3.6.1.4.1.6101.3004.2.1.2

patternID

Returns the pattern ID.

.1.3.6.1.4.1.6101.3004.2.1.3

patternName

Returns the pattern name.

.1.3.6.1.4.1.6101.3004.2.1.4

patternVersion

Returns the pattern version.

.1.3.6.1.4.1.6101.3004.3.1

deliveryQueue

Returns the delivery queue number.

.1.3.6.1.4.1.6101.3004.3.2

virtualAnalyzerQueue

Returns the Virtual Analyzer queue number.

.1.3.6.1.4.1.6101.3004.3.3

deferredQueue

Returns the deferred queue number.

.1.3.6.1.4.1.6101.3004.4.1.1

ifIndex

Returns the interface index.

.1.3.6.1.4.1.6101.3004.4.1.2

ifDescr

Returns the interface description.

.1.3.6.1.4.1.6101.3004.4.1.3

ifReceiveThroughput

Returns the interface receiving throughput.

.1.3.6.1.4.1.6101.3004.4.1.4

ifTransmitThroughput

Returns the interface transmitting throughput.