Integrating Deep Discovery Email Inspector with Trend Vision One

Procedure

1. On the Trend Vision One console, go to Point Product Connection → Product Connector.
2. Click Connect.
3. In the Product name field, select Deep Discovery Email Inspector.
4. Click the link to generate an enrollment token.
5. Copy the enrollment token for use on the Deep Discovery Email Inspector web console.
6. Click Save.
7. On the Deep Discovery Email Inspector web console, go to Administration → Integrated Products/Services and click Trend Vision One.
8. Paste the enrollment token you obtained from the Product Connector in Trend Vision One.
9. If you are not connecting Deep Discovery Email Inspector directly to Trend Vision One, configure the settings based on your connection method.
   • Through a Service Gateway
     1. On the Trend Vision One console, go to Workflow and Automation → Service Gateway Management. If available, click the Service Gateway Management 2.0 tab.
     2. If you do not have an existing Service Gateway deployed, install a Service Gateway.
        For detailed deployment instructions, see Deploying a Service Gateway Virtual Appliance.
     3. Click the Service Gateway name.
     4. Click Manage Services.
     5. Click the install icon to install and then enable the Forward proxy service.
     6. Record the Service Gateway IP address that is needed for connection settings on the Deep Discovery Email Inspector console.
     7. On the Deep Discovery Email Inspector web console, go to Administration → Integrated Products/Services and click Trend Vision One.
     8. Select Enable Service Gateway connection.
     9. Specify the IPv4 or IPv6 address of the Service Gateway.
   • Through the system proxy server
     Select Connect using a proxy server.
     You can click the link to configure the proxy server settings in Deep Discovery Email Inspector.
10. To send detection logs to Trend Vision One, select Forward detection logs to Trend Vision One.
11. Click Register.
12. Click Test Connection to verify.