After completing the installation, the server restarts and loads the Command Line Interface (CLI). Configure Deep Discovery Email Inspector network settings to gain access to the management console.
The following procedure explains how to log on to the CLI and configure the following required network settings:
  • Management IP address and netmask
  • Host name
  • DNS
  • Gateway

Procedure

  1. Log on to the CLI with the default credentials.
    • User name: admin
    • Password: ddei
  2. At the prompt, type enable and press Enter to enter privileged mode.
  3. Type the default password, trend#1, and then press Enter.
    The prompt changes from > to #.
  4. Configure network settings with the following command:
    configure network basic
  5. Configure the following network settings and press Enter after typing each setting.
    Note
    Note
    IPv6 settings are optional.
    • Host name
    • IPv4 address
    • Subnet mask
    • IPv4 gateway
    • Preferred IPv4 DNS
    • Alternate IPv4 DNS
    • IPv6 address
    • Prefix length
    • IPv6 gateway
    • Preferred IPv6 DNS
    • Alternate IPv6 DNS
  6. Type Y to confirm settings and restart.
    Deep Discovery Email Inspector implements specified network settings and then restarts all services.
The initial configuration is complete and the management console is accessible.