A SNMP Trap Message is the notification message sent to the SNMP server when events that require administrative attention occur.
- Go to Administration > System Settings > SNMP.
- Under Trap Messages, select Send SNMP trap messages.
-
Specify the trap message settings.
Option
Description
Manager server address
Specify the manager server address.
SNMP version
Select the SNMP version:
-
SNMPv1/SNMPv2c
-
SNMPv3
If you use SNMPv3, configure the SNMP server as follows:
-
Context Name: "" (default context)
-
Context Engine ID: <Auto>
-
(Optional) MD5 Authentication protocol: HMAC-MD5
-
(Optional) DES Privacy protocol: CBC-DES
-
Community name
Specify a community name.
Security model
Note:This field is only available for SNMPv3.
Select the security model:
-
No authentication or privacy
-
Authenticated
-
Authenticated with privacy
User name
Note:This field is only available for SNMPv3.
Specify the user name.
Password
Note:This field is only available for SNMPv3.
Specify the password.
Privacy passphrase
Note:This field is only available for SNMPv3.
Specify the privacy passphrase.
-
- Click Save.
-
(Optional) Click Download MIB to download the Management Information Database (MIB) files.
-
Users can open the MIB files to view all network objects that can be monitored and managed using the SNMP protocol, or import them into management consoles that support this protocol.
-
For a list of Deep Discovery Email Inspector supported SNMP object identifiers (OID), see SNMP Object Identifiers.
-