Views:
As part of the integrated solution, you must register Deep Discovery Director - Network Analytics (the appliance) to Deep Discovery Inspector.
To perform this task, you must first access the appliance's Settings screen and record the appliance's IP address and API key.
You then log into Deep Discovery Inspector and use this information to register the appliance.
Important
Important
Before performing this task, Deep Discovery Inspector must first be registered to Deep Discovery Director.

Procedure

  1. Perform on Deep Discovery Director - Network Analytics.
  2. Log on to Deep Discovery Director and access the Settings screen.
    Accessing the Settings Screen
  3. Record the appliance's IP address and API key.
    1. Go to System Settings → Network to find and record the IP address.
    2. Go to About to find and record the API key.
  4. Close the Settings screen.
  5. Perform on Deep Discovery Inspector.
  6. Log on to the Deep Discovery Inspector console.
  7. Go to Administration → Integrated Products/Services → Deep Discovery Director → Network Analytics.
  8. Under Connection Settings, type the Server address and the API key for the appliance.
  9. (Optional) If you have configured proxy settings for Deep Discovery Inspector and want to use these settings for connections to the appliance, select Use the system proxy settings and then configure the proxy server settings.
  10. Click Register.
    The Status changes to Registered and Connected.
    Note
    Note
    After the registration process is complete, the Test Connection button appears. You can click Test Connection to test the connection to the appliance.
  11. Log out of the Deep Discovery Inspector console.
Keywords: Deep Discovery Director - Network Analyzer to Deep Discovery Inspector,registering to Deep Discovery Inspector,registering Deep Discovery Director - Network Analyzer to