Views:
The Deep Discovery Director - Network Analytics appliance's correlation data and settings page are accessed through the Deep Discovery Director console. To access correlation data and the settings page, you must register the appliance to Deep Discovery Director.
You use the preconfiguration console to perform the registration.
From the preconfiguration console, you can use the following controls:
  • Press TAB to navigate to menu items and fields.
  • Press ENTER to make a selection.

Procedure

  1. Open the appliance's preconfiguration console using the desired method.
    • Use the Console tab on the Virtual Machine Client.
    • Use a remote access application such as PuTTy.
      Note
      Note
      SSH is enabled by default, which enables you to remotely access the preconfiguraton console. By using a remote access application, you can conveniently cut and paste registration information into the applicable fields.
  2. Log on to the preconfiguration console:
    Use the password that you configured during initial configuration. If you did not change the password, use the default password.
    Default user name and password:
    • User name: admin
    • Password: admin
    The Main Menu screen appears.
  3. Go to Register with Deep Discovery Director.
    The DDD Registration and Unregistration screen appears.
  4. Enter the Deep Discovery Director IPv4 address and API key.
    Note
    Note
    For more about how to find this information, see Deep Discovery Director IP Address/API Key
  5. Navigate to Register and then press ENTER.
    The Status changes to Connected.
  6. Navigate to Cancel and then press ENTER to return to the Main Menu.
  7. Navigate to Logout and then press ENTER.
Keywords: to Deep Discovery Director,registering to Deep Discovery Director,registering to,using to register to Deep Discovery Director