Views:
To install Deep Discovery Director - Network Analytics (the appliance), you must first create a virtual machine with the specifications outlined below. You can then use the ISO image supplied by Trend Micro to install the appliance.

Procedure

  1. Create a custom virtual machine with the following minimum specifications:
    • Virtual machine hardware version: 8
    • Guest operating system: CentOS Linux 6/7 (64-bit)
    • CPU: 2-3 (8-12 cores)
    • Memory: 64 GB
    • Network interface card: 1 with 1 Gbps adapter
    • SCSI Controller: LSI Logic Parallel
    • Hard disk: 6 TB (Thick Provisioned Lazy Zeroed)
    • Configure the CD/DVD or Floppy drive device to connect at power on with the appliance's ISO image file selected.
    The new virtual machine displays in the left-hand pane.
  2. Select and then power on the new virtual machine.
    The appliance's installation starts automatically with power on. The INSTALLATION SUMMARY screen appears where you will be asked to accept the EULA.
  3. On the INSTALLATION SUMMARY screen, click on the EULA button.
    The EULA screen opens.
  4. Read the EULA, select Accept license agreement terms at the bottom of the screen, and then click DONE located at the top-left to exit the EULA screen.
  5. Click Begin Installation.
    After installation completes, you can log on to the appliance's preconfiguration console to continue deployment.
Keywords: Deep Discovery Director - Network Analytics,using to install Deep Discovery Director - Network Analytics,creating when installing Deep Discovery Director - Network Analytics,installing