Views:

The following procedure is for registering to Deep Discovery Director. If you have already registered and want to change the connection settings, you must first unregister.

  1. Go to Administration > Integrated Products/Services > Deep Discovery Director.
  2. Type the Server Address.
  3. Type the Port number.
  4. Type the API key.
    Note:

    You can find this information on the Help screen on the management console of Deep Discovery Director.

  5. Click Register.

    The Status changes to Registered | Connected.

    Note:

    If the Deep Discovery Director fingerprint changes, the connection is interrupted and the Trust button appears. To restore the connection, verify that the Deep Discovery Director fingerprint is valid and then click Trust.

    After the registration process is complete, the Test Connection button appears. You can click Test Connection to test the connection to Deep Discovery Director.

Parent topic: Deep Discovery Director