Use the Data Sources screen, in , to display and configure from which Deep Discovery Inspector appliances Deep Discovery Director (Internal Network Analytics Version) draws data for advanced threat analysis.
The Data Sources screen displays the following information:
Column |
Information |
---|---|
Display Name |
The display name of the Deep Discovery Inspector appliance. |
Host Name |
The host name of the Deep Discovery Inspector appliance. |
IP Address |
The IP address of the Deep Discovery Inspector appliance. |
Connected Network Analytics |
The display name of the connected Deep Discovery Director - Network Analytics server. |
Connection Status |
The connection status of the Deep Discovery Director - Network Analytics server. |
Version |
The version of the Deep Discovery Inspector appliance. |
Appliance Proxy Settings |
Displays either Enabled or Disabled, depending on whether the Deep Discovery Inspector appliance's proxy settings are used. |
Bandwidth |
The bandwidth the Deep Discovery Inspector appliance consumes. |
Last Synchronized |
Date and time data was last synced from the Deep Discovery Inspector appliance. |
Test Connection |
Date and time the Deep Discovery Inspector appliance established connection to Deep Discovery Director - Network Analytics as a Service. Click Test Connection to have the Deep Discovery Inspector appliance try to connect to Deep Discovery Director - Network Analytics as a Service. |
This feature or screen is not available when Deep Discovery Director (Internal Network Analytics Version) is operating in Standalone Network Analytics mode.