Ports are found at the back of the appliance, as shown in the following image.
Network interface ports include:
  • Management port (default is eth0): Connects the appliance to the management network
  • Custom port (a port that is not used as the management port or for high availability): Connects the appliance to custom networks that are reserved for sandbox analysis
    Note
    Note
    • You can configure an interface (default is eth0) or a NIC teaming port as the management port.
    • If you are using high availability, eth3 is used to directly connect two identical Deep Discovery Analyzer appliances and cannot be used for sandbox analysis.
    • If you are not using high availability, an appliance connected to eth1, eth2, or eth3 can be used for sandbox analysis.
Deep Discovery Analyzer requires one available static IP address in the management network.
If sandbox instances require Internet connectivity during sample analysis, Trend Micro recommends allocating one extra IP address for Virtual Analyzer. The Sandbox Management → Network Connection screen allows you to specify static addresses. For more information, see the Deep Discovery Analyzer Administrator's Guide.