Views:
Verify that the secondary appliance has the same firmware, hotfix, and patch version as the active primary appliance.
To view the appliance firmware, hotfix, and patch version, see the Deep Discovery Analyzer Administrator's Guide.
Update or upgrade the appliance firmware, hotfix, and patch version as necessary. For details, see the Deep Discovery Analyzer Administrator's Guide.
Note
Note
  • If your network has Trend Micro Apex Central, only register the active primary appliance to Trend Micro Apex Central.
  • When using high availability, use the virtual IP address to register.

Procedure

  1. Perform the installation and deployment tasks as described in Installing the Appliance.
  2. Configure the secondary appliance.
    1. On the management console of the secondary appliance, go to AdministrationSystem Settings and click the Cluster tab.
    2. Select Secondary mode.
    3. Type the IPv4 address or IPv6 address of the active primary appliance in Active primary IP address.
      Note
      Note
      If you are using high availability, type the IPv4 virtual address or IPv6 virtual address.
    4. Type the Active primary API key.
    5. Click Test Connection.
      Tip
      Tip
      Secondary appliances can test their connection to the active primary appliance at any time. Click Test Connection to get detailed information about any connectivity problems.
    6. Click Save.
  3. (Optional) Configure additional settings on the secondary appliance.
    1. Configure the sandbox network connection setting.
      Note
      Note
      Trend Micro recommends using the external network connection setting of the active primary appliance.
    2. Configure the Sandbox for macOS setting.
      For details, see the Deep Discovery Analyzer Administrator's Guide.
    3. Configure the appliance network settings.
      For details, see Network Tab.
    4. Add accounts.
      For details, see Accounts Tab.
Note
Note
Secondary appliances automatically deploy sandbox instances based on the sandbox allocation ratio of the active primary appliance. The following table lists a configuration example:

Example Configuration Using Two Images

Appliance Type
Deep Discovery Analyzer Hardware Model
Maximum Number of Instances (Total)
Number of Windows 7 Instances
Number of Windows 8.1 Instances
Primary appliance
1200 or 1100
60
40
20
Secondary appliance
1200 or 1100
60
40
20