Procedure

1. Go to Administration → System Settings → Network Interface.
2. Configure the settings under the Port List section.
   • To set the Management Port on the selected interface, select an option from the drop-down list. By default, Deep Discovery Analyzer uses the eth0 interface as the management port.
   • To configure the port settings for the interface used for sandbox analysis, click Edit.
   • To view detailed information for the high availability port, click View Details.
3. Click Save.
4. When prompted to restart the network service, click Yes.
   The system restarts the network service. This may take some time. Wait for the process to complete before you can access the management console again.