Verify that the secondary appliance has the same firmware, hotfix, and patch version
as the active primary appliance.
To view the appliance firmware, hotfix, and patch version, see About Screen.
Update or upgrade the appliance firmware, hotfix, and patch version as necessary.
For details, see Updates.
Note
|
Procedure
- Perform the installation and deployment tasks as described in the Deep Discovery Analyzer Installation and Deployment Guide.
- Configure the secondary appliance.
- On the management console of the secondary appliance, go to and click the Cluster tab.
- Select Secondary mode.
- Type the IPv4 address or IPv6 address of the active primary appliance in Active primary IP address.
Note
If you are using high availability, type the IPv4 virtual address or IPv6 virtual address. - Type the Active primary API key.
- Click Test Connection.
Tip
Secondary appliances can test their connection to the active primary appliance at any time. Click Test Connection to get detailed information about any connectivity problems. - Click Save.
- (Optional) Configure additional settings on the secondary appliance.
- Configure the sandbox network connection setting.For details, see Enabling External Connections.
Note
Trend Micro recommends using the external network connection setting of the active primary appliance. - Configure the Sandbox for
macOS setting.For details, see Sandbox for macOS Tab.
- Configure the appliance network settings.For details, see Network Tab.
- Add accounts.For details, see Accounts Tab.
- Configure the sandbox network connection setting.
NoteSecondary appliances automatically deploy sandbox instances based on the sandbox allocation
ratio of the active primary appliance. The following table lists a configuration example:
Example Configuration Using Two Images
|