Views:

Purpose: Manage the network interface settings for selected gateways. After a gateway in Routing Mode is registered you must edit all interfaces, with the exception of the WAN and LAN1 interfaces, from Cloud Edge Cloud Console.

Location: Gateways > (Selected Gateway) > NETWORK > Interfaces

  1. Click an interface's name.
  2. Configure the interface settings.

    To configure wireless network interfaces, see Routing Mode: Editing Wireless Network Interfaces.

    Option Description

    Type

    Select L3.

    If there are any outstanding setting changes on Cloud Edge Cloud Console, you cannot change the interface type until after you click Deploy All to make the existing changes effective.

    Mode

    This is a read-only field where the mode is pre-set to Static.

    IPv4 address

    Specify the IPv4 address (example: 10.10.10.23).

    IPv4 netmask

    Specify the IPv4 subnet mask (example: 255.255.254.0).

    IPv4 default gateway

    Specify the IPv4 default gateway (example: 10.10.10.1). This settings is only required for WAN configurations.

    MTU

    Specify a value from 576 through 1500.

    MSS

    Select Overwrite and specify a value from 536 through 1460.

    Note:

    The MSS value must not be greater than (MTU - 40).
  3. Click Save.
Parent topic: Editing Network Interfaces