Purpose: Enable remote administrative access to the gateway. Enabling SNMP allows users to obtain supported objects information from an SNMP manager.

Location: Gateways > (Selected Gateway) > NETWORK > Administrative Access

  1. Select the services to enable for the interface.

    • On-Premises Console

    • Ping

    • SSH

    • SNMP

  2. In the field below the table, specify IPv4 addresses allowed to remotely access the gateway.
    Note:

    This setting determines the IPv4 address ranges that can remotely access the gateway. Single IPv4 addresses are supported and the '-' symbol can be used as a range mark. Format the IPv4 address and netmask as 192.168.1.1/24. If nothing is specified, all IPv4 addresses are allowed.

    IPv6 addresses are not supported for administrative access.

  3. Click Save.
Parent topic: Administrative Access