Views:
The Network Sensor attack simulations require that you prepare a Deep Discovery Inspector appliance or a Virtual Network Sensor and two Windows endpoints. Refer to the Environmental requirements instructions provided in the simulation description.

Procedure

  1. Configure port 445 on both Windows endpoints to enable file sharing.
  2. Open the Trend Vision One console on one of the endpoints.
  3. On the Trend Vision One console, click Resource Center (resourceCenter=73b1d431-813b-467c-8098-62f12bb6e2af.jpg) in the bottom left corner.
  4. Click Simulations.
  5. Click Network Attack.
    The Network Attack Simulations dialog appears.
  6. Click Download Demo Script to download an archive file to the Windows endpoint.
  7. Extract the archive file on the Windows endpoint.
    Note
    Note
    The archive file is password protected. The password is displayed on the Simulations dialog.
  8. Run the .ps1 demo script file on the Windows endpoint.
    The Windows Command Prompt opens.
  9. Follow the instructions in the Windows Command Prompt window to execute the demonstration commands.
  10. After executing the commands, go to the Trend Vision One console to view the expected results.
    Note
    Note
    Results might take a few minutes to appear.