Configuring Syslog Forwarding

Procedure

1. Go to Administration → Settings → Syslog Settings.
   The Syslog Settings screen appears.
2. Select the Enable syslog forwarding check box.
3. Configure the following settings for the server that receives the forwarded syslogs:
   • Server address: Syslog server IP address or FQDN
   • Port: Syslog server port number
   • Protocol: Select the transmission protocol

     Note If SSL/TLS is selected, Apex Central accepts valid self-signed certificates by default. If the server certificate contains a Subject Alternative Name, the Subject Alternative Name must contain the server FQDN or IP address. For additional security, use a valid server certificate or upload the server certificate to Apex Central.

4. (Optional) To upload a server certificate:

   Important Apex Central only supports server certificates in X.509 format with .DER or .PEM encoding. Apex Central only supports uploading server certificates for SSL/TLS transmissions.

   1. Select the Use server certificate check box.
   2. Click Select to select the server certificate from your computer.
   3. Click Open.
      Apex Central uploads the selected server certificate.
5. Select the log format:
   • CEF: Uses the standard Common Event Format (CEF) for log messages
   • Apex Central format: Sets the syslog Facility code to "Local0" and the Severity code to "Notice"
   For more information, see Supported Log Types and Formats.
6. Configure the frequency for when Apex Central forwards the logs.
7. Select the log type(s) to forward:
   1. Select a log category from the Log type drop-down list:

      Note You can select log types from multiple log categories.

      • Security logs
      • Product information
   2. Select the check box(es) for the log(s) you want to forward.
      Apex Central displays the total number of selected log types next to the Log type drop-down list.
   3. (Optional) Select another log category from Log type drop-down list to select additional logs types to forward.
8. (Optional) Click Test Connection to test the server connection.

   Note Testing the connection does not save the syslog server settings.

   The syslog server connection status appears at the top of the screen.
9. Click Save.
   • Apex Central starts forwarding logs to the configured syslog server.
   • To monitor the log forwarding status, go to Administration → Command Tracking and select Forward Syslog from the Command drop-down list.
     For more information, see Querying and Viewing Commands.