Views:

Procedure

  1. Log on to the preconfiguration console.
    The following are the default credentials:
    • User name: admin
    • Password: admin
    The Main Menu screen appears.
  2. Select Configure network settings and then press ENTER.
    The Configure Network Settings screen appears.
  3. Configure the following required settings:
    • IPv4 address
    • Subnet mask
    • IPv4 gateway
    • DNS server 1
    Note
    Note
    Only IPv4 settings can be configured on the preconfiguration console. To configure IPv6 and port binding, use the Network screen on the management console.
  4. Press TAB to navigate to Save, and then press ENTER.
    The Main Menu screen appears after the settings are successfully saved.