Device_Settings
The Device Settings screen
Use the Device Settings screen to configure the management IP address settings and register Threat Discovery Appliance to Trend Micro Control Manager.
These tasks can also be performed on the web-based console.
To modify settings using the Preconfiguration Console:
Log on to the Preconfiguration Console. The Main Menu appears.
Type 2 to select Device Settings and press [Enter]. The Device Settings screen appears.
Configure IP address settings.
To use dynamic IP address:
In the Type field, use the space bar to change the IP address option from static to dynamic.
To use static IP address:
In the Type field, use the space bar to change the IP address option from dynamic to static.
Type a new IP address, Subnet mask, Default gateway IP address, and Primary and Secondary DNS server IP addresses.
Type a new host name.
(Optional) Type a VLAN ID.
(Optional) Register to Trend Micro Control Manager.
You can also use the web-based console to register to Control Manager.
In the Register to Trend Micro Control Manager field, use the space bar to change the option to [yes].
Type the Control Manager IP address.
In the Enable two-way communication port forwarding field, use the space bar to set the option to [no] or [yes].
To enable two-way communication between Threat Discovery Appliance and Control Manager, type the IP address and pot number of your router or NAT device in the Port forwarding IP address and Port forwarding port number fields.
Configuring the NAT device is optional and depends on the network environment. For more information on NAT, refer to the Trend Micro Control Manager Administrator’s Guide.
Navigate to Return to main menu and press [Enter] to return to the main menu.
Type 7 and press [Enter] to save the settings.
See also: